Lesson access board for online drafting courses This is the Access Board for the Online Drafting Courses created by Tim Davis. Once your tuition is received for whichever drafting course you're taking, an account will be created for you on this board. These courses are only available to registered students.

WOULD YOU LIKE TO HAVE ACCESS TO "ALL" OF MY COURSES? CLICK HERE!

+-

Mission

Drafting Certification

 

Credential: Certificate
 

The purpose of our Drafting Certificate program is to provide more than basic Architectural and Mechanical Drafting Skills. Our students will receive the skills to create complete Residential Construction, Survey, and Mechanical / Machine drawings. Subjects include drafting practices, and CAD software. Students are taught by a professional General Draftsman who has over 39 years drafting experience.

 

Certification of Achievement

Course Links

Related Links

Author Topic: Coordinates - DonL  (Read 859 times)

October 22, 2015, 01:32:07 PM
Read 859 times

Tim

  • Master Draftsman and Architectural Designer
  • *****
  • Information
  • Hero Member
  • Administrator
  • Posts: 1021
  • If it's worth learning, it's worth learning right.
    • View Profile
    • House Plan Cad File Archive
Quote from: DonL
I have been using the tutoring system and I'm at the point to putting in relative coordinates. I must be doing something wrong. I input line and then input 30,30 but it doesn't go to correct coordinates. I believe my question is where do you put the cursor when you input coordinates?
Thanks
Don
If I understand what you are asking Don, type "line", pick the point where you want the line to start from and then type "@30,30" then hit enter, and the line will go where you want it to go. The "@" symbol tells the cad program that you are sending out the other end of the line to a certain vector on the grid.
© [Tim Davis] [2017] All Rights Reserved
No part of this website or any of its contents may be reproduced, copied, modified or adapted in any way, shape, form, of fashion without the prior written consent of the author, unless otherwise indicated for stand-alone materials.


There are no comments for this topic. Do you want to be the first?
 

Powered by EzPortal
Student Roll: Dom, BOrtiz, LukeL, BoreyN , ChayaW, Hosam, PhillipS, TroyB, Kelsey, Skribblez, Emma, almondbrad, Melanie Amiatu, Dentubale, AlfonzoT, DavidC, Vanik, SolidRock, JerryW, RaymondH, AMims, RyanR, PFigueiredo, ENosakhare, VHarris, AnstonR, ChristopherP, Anoop, TinyLittleWorkshop, ArturoR, StephenO, JenniferL, BrianK, RightHandTech, TimothyS, NLorette, JOswald, SLortz, Cloraine, AnstonR , Pongo, Emily, Elizabeth, RWarburton, d_gsmer.0036, WayneM, SravyaJ, bpierre, WKincaid, QAncrum, RBruno, JRice, HollyM, MaxG, cchirichello, AndyP, MGarcia, RHumphries, TBlakesleay, CarlD, mschumann5, KiameshaL, AHullinger, Petras, AMacLeod, PrajeshP, JDorvee, DHagblom, CSantos, KAspden, OwenO, J.C. Kavanagh, PDodson, MarkK, KMarchbanks, JMcMichael, DGaul, EQUAYE, Calvin, FrancisG, Moses, hejingyun, truckerman, ArtieW, RickN, ABOY760, RaulP, SKomarov, AMehta, Angel, WNash, CWilder, BrettC, TravisT, BrannonB, EdwardC, MWellborn, CBBC, AOdhr, KGeorge, DBlack, SHarris, MStearn, JNicholls, BJensen, EMurnion, TTravis, SolomonE, WilliamD, ProperlyPolished, ShirleyR, JAdkins, FrankB, Sutter62, JTaylor, AlbertE, SFischer, DOsterman, KUmukoro, SDRose, DHeinle, KEllis, IWalden, HCantos, DSchiaroli, Donna, JBrown, JPeachey, PBrunson, GUnger, HGregg, EDybdahl, CMendez, Lowbridge, Wallace, ronwenger, nmtaylor1, Andreas, findjk, Andrew, Benjamin, DonHyde, Chanelle, Matthew, McCauley, Rebecca, Oscar, Patrick, JAguirre, GAdams, SChandi, CHewitt, JFranklin, HotShot, Rascal, SimonK, HStruss, SSharma, LeslieH, Spanks, EBarak, JNguyen, SLambert, Drooplefan, WHastedt, LWeston, DMorgan, PAmorello, KathleenN, CPadier, TMital, Ibrahim, putterer, JoelC, Godwin Osagie, THood, MAckler, JSullivan, MHanson, YSherman, MSprinks, BMaher, RHolk, Lewdy1, BNoffke